Quality concrete Sawing & Drilling were successful in tendering on the concrete cutting required at the Samson Brook Dam for the Water Corporation. Situated approximately 2 hours south of the Perth CBD.

The extent of the work included both the use of our wall saw & wire saw.

The wall saw was required to remove thick concrete walls at the up stream area of the dam to allow for access to the pipes running through the dam.

The wire saw was needed at the down stream area of the dam to cut around a very large section of concrete, which encased two steel pipes.

Once again the concrete sawing was all completed within the required time, while still maintaining consistency in Quality, safety & performance.

Quality concrete sawing & drilling were contacted by S & N Civil toward the end of 2010 and requested to provide a cost to remove two large section of concrete from the roof of the rejects tunnel at the Ravensthorpe Nickel Mine. The requirement was to cut out the concrete sections & once the two large concrete sections were removed, we were required to cut a 30 degree chamfer to the remaining edge. The reason S&N Civil made contact with Quality Concrete Sawing & Drilling was because they required a Perth based Concrete Cutting Company who could get the job done fast, efficiently and with no down time.