Wire Sawing

Wire Sawing

Quality Concrete Sawing & Drilling have the latest technology in wire sawing equipment, which can be mobilized to site any where around Perth or Wester Australia as required. Wether wire sawing in the Perth Metro area or having to be totally self-sufficient any where around Western Australia we strive to complete any wire sawing tasks on time & on budget. With a great team of experienced operators in constant communication with our in house mechanic backed up by our Operation managers full support, delays are simply not an option when wire sawing in any location.

Wire Sawing is a very efficient way of cutting large sections of concrete to be removed, for example; foundations, bridges, damns or create penetrations through thick walls. The added advantage of wire sawing is that there is no need for over cutting into remaining concrete. Much reduced noise & vibrations are also a great advantage to the use of the wire saw. When the section of concrete has extremely limited access, is very thick or an awkward shape the wire saw will be the equipment required for the job. With virtually no depth limit wire sawing is a convenient solution for your project.

Contact Details

Address

Unit 2/90 Distinction Road
Wangara
WA 6065

Telephone

(08) 9303 4840

Mobile

0448 797 801

Fax

(08) 9303 4850

Latest News

Client - Water Corporation Project - Samson Brook Dam

Quality concrete Sawing & Drilling were successful in tendering on the concrete cutting required at the Samson Brook Dam for the Water Corporation. Situated approximately 2 hours south of the Perth CBD.

The extent of the work included both the use of our wall saw & wire saw.

The wall saw was required to remove thick concrete walls at the up stream area of the dam to allow for access to the pipes running through the dam.

The wire saw was needed at the down stream area of the dam to cut around a very large section of concrete, which encased two steel pipes.

Once again the concrete sawing was all completed within the required time, while still maintaining consistency in Quality, safety & performance.

S & N Civil - Ravensthorpe Nickel Mine

Quality concrete sawing & drilling were contacted by S & N Civil toward the end of 2010 and requested to provide a cost to remove two large section of concrete from the roof of the rejects tunnel at the Ravensthorpe Nickel Mine. The requirement was to cut out the concrete sections & once the two large concrete sections were removed, we were required to cut a 30 degree chamfer to the remaining edge. The reason S&N Civil made contact with Quality Concrete Sawing & Drilling was because they required a Perth based Concrete Cutting Company who could get the job done fast, efficiently and with no down time.